The Little Enchilada Project
PBC specializes in Mazda Miatta. One of the most popular upgrades for a Miatta is "The Little Enchilada", provided by Flyin' Miatta.
We sell and professionally install this awesome performance upgrade.
If you want to take your stock Mazdaspeed up to right around 200 hp at the wheels, you`ll follow the first four suggestions in our recommended upgrade path. We`ve taken these parts and bundled them together for you - and then cut the price by $250 so you not only get a suite of products designed to work together, you also save money!
The Little Enchilada package includes the following:
— FM intake
High-performance intake for Mazdaspeed MX-5
The factory boost control gets very confused when a low-restriction intake is installed, leading to a massive boost spike at 5000 rpm. It looks good for peak power but it`s not very friendly to drive. It can also lead to a hard boost cut from the stock computer. So we added a manual boost controller to our intake that lets you set the boost where you want it. There`s a big gain all across the powerband and no embarrassing boost cuts.
The piping is polished stainless steel with all the fittings required. A signal line for the boost control is included at the compressor outlet for more precise control than the stock location. The large air filter is positioned up near the firewall to keep it away from hot intercooler pipes and other sources of underhood heat. Includes silicone hoses and clamps.
Available for cars with stock ECUs or in a no-MAF version for cars with aftermarket ECUs such as the Hydra Nemesis (shown). The no-MAF version does not have a fitting for a bypass valve. If you are planning to upgrade in the future, install the stock ECU version now. The MAF can be replaced with a short length of pipe or silicone hose when a Hydra is installed. Not CARB approved.
Please note that this component is really intended to be installed as part of our complete intake kit. We strongly recommend you install the complete kit. If you do want to install just this intake, some adapters will be needed in order to complete the plumbing to the stock bypass valve.